12-60W Constant Voltage Led Driver Thin Type ETL UL CE listed
Our 12-60W Constant Voltage Led Driver Thin Type is an adjustable and compact power converter designed to drive LED lighting systems. It supports a wide input voltage range of 90-264V AC, and features overvoltage, overload, and short circuit protections. With its high efficiency and low ripple, it delivers stable and reliable power output to your LED lighting systems. The driver is only 21mm thick, making it easy to install in narrow spaces. It’s perfect for use in indoor and outdoor lighting, stage and theatrical lighting, and advertising light boxes. By using our LED driver, you can improve your lighting efficiency, extend the lifespan of your LED lights, and reduce energy costs.
Features:
- Input Voltage: 100-240VAC
- Power Range:12-60W
- High Eficiency: up to 89% ;
- P42 Design; Flicker-free
- Cooling by free air convection
- Suitable for dry or damp location use
- Protection:short circuit/over loading/over current/ Over temperature
- 3 years warranty
| MODEL | QXP-LD-1201000 | QXP-LD-240500 | QXP-LD-1202000 | QXP-LD-2401000 | QXP-LD-1203000 | QXP-LD-2401500 | QXP-LD-1205000 | QXP-LD-2402500 | ||||||||||
| OUTPUT | DC Voltage | 12V | 24V | 12V | 24V | 12V | 24V | 12V | 24V | |||||||||
| Rated Current | 1A | 0.5A | 2A | 1A | 3A | 1.5A | 5A | 2.5A | ||||||||||
| Rated Power | 12W | 24W | 36W | 60W | ||||||||||||||
| Voltage Tolerance | +/-0.5V | |||||||||||||||||
| Start-up Time (Typ.) | <500ms | |||||||||||||||||
| INPUT | Voltage Range | 100 – 240VAC | ||||||||||||||||
| Frequency Range | 50/60Hz | |||||||||||||||||
| AC Current (Typ.) | 0.3A | 0.3A | 1A | 1A | 1A | 1A | 1.2A | 1.2A | ||||||||||
| Efficiency (Typ.) | 84% | 87% | 87% | 88% | 88% | 88% | 90% | 91% | ||||||||||
| Power Factor (Typ.) | <0.60c @ 120VAC and full load | |||||||||||||||||
| Inrush Current (Typ.) | 29A / 120VAC | 35A / 120VAC | 36A / 120VAC | 38A / 120VAC | ||||||||||||||
| Leakage current | <0.5mA / 120VAC | |||||||||||||||||
| GUARDS | Over Current | Hiccup mode, auto-recovery upon removal of fault condition | ||||||||||||||||
| Short Circuit | Hiccup mode, auto-recovery upon removal of fault condition | |||||||||||||||||
| ENVIRO. | Ta | 4°F (-20°C) to 104°F (40°C) | ||||||||||||||||
| Working Humidity | 20 – 90% Relative Humidity, non-condensing | |||||||||||||||||
| Storage Temp. & RH | -40°F (-40°C) to 176°F (80°C), 10 – 95% Relative Humidity | |||||||||||||||||
| Vibration | 10 – 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes | |||||||||||||||||
| OTHER | MTBF | 292K hrs min. | 318K hrs min. | 308K hrs min. | 300K hrs min. | |||||||||||||
| Cooling | Free Air Convection | |||||||||||||||||
| Life Time* | 50,000 hours | |||||||||||||||||
| Case | Fully isolated polycarbonate plastic case with built in terminal block for direct-wire connections | |||||||||||||||||
| Dimensions | (80mm L x 33mm W x 21mm H) | (100mm L x 43mm W x 21mm H) | (100mm L x 43mm W x 21mm H) | (130mm L x43mm W x 21mm H) | ||||||||||||||
| Protection | Short Circuit | Hiccup mode, recover automatically after fault condition is removed |
| Over Current | ≤1.2*| out | |
| Over Loading | ≤120% | |
| Over temperature | 100°C士10°C,Shut down o/p voltage,recover automatically after temperature goes down. | |
| Safety& EMC | Safety standards | EN61347-1 EN61347-2-13 UL Std. 8750, CAN/CSA Std. C22.2 No. 250.13; Class 2 Power Supply, ETL Listed for dry and damp location use,EN61347-1 EN61347-2-13 |
| Withstand voltage | I/P-O/P:3KVAC IP-FG:1.88KVAC O/P-FG:0.5KVAC | |
| Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25*C/70%RH | |
| EMC EMISSION | EN55022, EN55015 Class B | |
| Notes | 1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25°C of ambient temperature.2. To extend the driver’s using life ,please reduce the loading at lower input voltage | |
Dimensions
12W 24-36W 60W
Warning
※Prevent to reverse polarity;
※Risk of Electric Shock. When used outdoors, install only on a circuit protected by a Class A GFCI;
※Risk of Fire. Istallation involves special wiring methods to run wiring through a building structure. Consult a qualified electrician;
※Risk of Electric Shock. Mount the unit at a height greater than 1 foot from the ground surface.
