Waterproof Led Driver 60 Watts 24 Volt Power Supply For Led Strips
Waterproof LED Driver for LED Strips is designed with excellent features for superior performance and durability. The input voltage ranging from 100V to 240V allows this driver to work seamlessly with all LED strips. The 60-watt power output delivers constant power without any voltage fluctuations, ensuring high-quality LED lighting. Its waterproof nature makes it ideal for outdoor and indoor use, especially in harsh conditions. Users can expect high operational efficiency, energy savings, and minimal heat emission, ensuring long-lasting LED operation. The driver is easy to install and comes with overvoltage, over-current, short-circuit protection. Ideal for LED backlit signs, lighting, and displays, this waterproof LED driver ensures superior operational efficiency and longevity.
■Description
- Output constant voltage
- Range 100-277VAC
- Built-in PFC function, PF>0.95
- Efficiency>88%
- Protections:short circuit/over current/over temperature
- Cooling by free air convection
- IP67 design for indoor or outdoor installation .
- Dimming function:DALI dimmable type
- Suitable for LED lighting applications by PWM output
- Compliance to worldwide safety regulations for lighting
- Suitable for dry/damp/wet locations
- 5 years warranty
| Model | QXP-LDV-1205000DL | QXP-LDV-2402500DL | QXP-LDV-3601670DL | QXP-LDV-4801250DL | ||||
| Output | DC Voltage | 12V | 24V | 36V | 48V | |||
| Voltage Accuracy | ±0.5V | |||||||
| Rated current | 5.0A | 2.5A | 1.67A | 1.25A | ||||
| Rated power | 60W | 60W | 60W | 60W | ||||
| Input | Voltage Range | 100-277VAC | ||||||
| Frequency Range | 47～63HZ | |||||||
| Power Factor ( Typ.） | PF≧0.90/110V ; PF≧0.90/220V | |||||||
| Full Load Efficiency（Typ.） | >88% | >88% | >88% | >88% | ||||
| AC Current（Typ.） | 0.69A@110VAC | 0.34A@220VAC | ||||||
| Leakage current | ﹤0.70mA/110VAC ; ﹤0.75mA/220VAC | |||||||
| Protection | Short Circuit | Protection type: Hiccup mode, recovers automatically after fault condition is removed | ||||||
| Waterproof rate | IP67 | |||||||
| Over Current | ≦1.4*Iout | |||||||
| Over temperature | 100℃±10℃ shut down o/p voltage, re-power on to recover | |||||||
| Environment | Working TEMP. | -40～+50℃ | ||||||
| Working Humidity | 20～95%RH,non-condensing | |||||||
| Storage TEM.,Humidity | -40～+80℃，10～95%RH | |||||||
| TEMP.coefficient | ±0.03%/℃（0～50℃） | |||||||
| Vibration | 10～500Hz，5G 12min./1 cycle，period for 72min.each along X,Y,Z axes | |||||||
| Safety&EMC | Safety standards | EN61347 EN61547 | ||||||
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | |||||||
| Isolation resistance | I/P-O/P I/P-FG O/P-FG：100MΩ/500VDC/25℃/70%RH | |||||||
| EMC EMISSION | Compliance toEN55015,EN61000-3-2 (≧50%load) | |||||||
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6 ,11,EN61547,A light industry level （surge4KV） | |||||||
| Others | Weight | 0.8Kg | ||||||
| Size | 140*67*34mm（L*W*H） | |||||||
| Notes | 1. All parameters NOT specially mentioned are measured at 110V~270VAC input , rated load and 25℃of ambient temperature. 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3. Tolerance:includes set us tolerance,line regulation and load regulation . | |||||||
- Input with Live Wire(L) Neutral Wire (N)
- Output LED SEC output Positive(LED+),output negative(LED-).Connected to LED Lights.
- Signal Dimming （DA1）, (DA2） DALI Non polar！Connected to the BUS of the DALI Master.
- When installing the LED driver and making input and output connections, cross-section area of conductor for input and output terminal block:0.75mm²(cord type: H03VVH2-F or H03VV-F).
- Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
■Dimming Operation
■Advantage:
- OEM/ODM
- Automatic equipment: EMI device , oscilloscope, automatic glue filling machine, intelligent electronic aging test frame, SMT machine, wave soldering machine.
- Reasonable price with good quality and best delivery time.
- We have a strong R & D team to help customer develop new and stable products
- Certificate:UL,ETL,,CE,RoHS,SAA,C-Tick,RCM,TUV,CCC UKCA etc.
■Instruction:
1)This driver should be installed by qualified and professional person;
2)Please make sure the transformer is installed with adequate ventilation around it to allow for heat dissipation.
3)Ensure that wiring is correct before test in order to avoid light and power supply damage; Dimming Operation
Connect the Dali signal line to the Dali bus of the controller (the Dali Master). After Dali Master scanning and address assignment, the driver can be successfully dimmed. Please refer to Diagram 1
Notice:In the market, some DALI controllers has bus-powered functions .If not,please add an extra power supply.(DALI Power).
Any incorrect connecting of signal line and output line would damage the master.
